Custom 6063-T5 6061-T6 Aluminum Extrusion Heat Sinks with Drilling and CNC Machining
-
Grade6000 SeriesTemperT3-T8
-
ApplicationHeat SinkShapeT - Profile
-
Alloy Or NotIs AlloyModel NumberS240301
-
Tolerance0.05mmProcessing ServiceBending, Decoiling, Welding, Punching, Cutting, extruding
-
Delivery Time15-21 daysProduct nameCustom Extrusion Aluminum Heat Sink Enclosure
-
ColorPanton ColorSurface treatmentAnodized/oxide etc /powder coated
-
ToolingMade by ourselfCertificationISO9001:2008/ ISO14001:2004/ OHSAS 18001:1999/PPG/TUV
-
KeywordHeatsinkMaterial & TemperAlloy 6063-T5/6061-T6
-
Deep processExtrusion Driling Precison Cutting CNCFabricationExtruded+cutting+machining
-
LengthLongest 6 Meters
Broad mounting base with drilled fixing points
The illustrated aluminum heat sink has a broad flat face with several fixing holes and a longitudinal finned section beneath it. Its drawing should define both the contact face and the space needed around the fins.
Define the extrusion and secondary work
Provide base thickness, fin geometry, overall width and the required cut length. Locate the holes from the references used to position the heat sink in its assembly. Identify thread details or additional CNC features where they are required.
The listed material and temper options are 6063-T5 and 6061-T6. Select the required combination for the ordered component. Extrusion, cutting, drilling and CNC fabrication are named processes, with the actual operation sequence agreed against the finished drawing.
Choose the required anodized, oxide or powder-coated surface condition and color. Mark contact areas or holes needing masking and state the dimensional inspection requirements. Include quantities, drawing revision and any thermal operating constraints for review; the photo does not provide a measured dissipation rating.
